F-1 TOOLS CO., LTD.
EQUIPMENT
Equipment List
| Manufacturer | Model | Table size | Features | Number of machines | Year installed |
|---|---|---|---|---|---|
| DAHLIN | DCM2213 | x1300 y2200 z750 | Portal machining center | 1 | - |
| Manufacturer | Model | Table size | Features | Number of machines | Year installed |
| DAHLIN | DCM2213 | x1300 y2200 z750 | Portal machining center | 1 | - |
| Manufacturer | Model | Table size | Features | Number of machines | Year installed |
|---|---|---|---|---|---|
| OKUMA | MA-600H II | x1000 y900 z100 | No.50 | 1 | - |
| Manufacturer | Model | Table size | Features | Number of machines | Year installed |
| Okuma Corporation | MA-600H II | x1000 y900 z100 | No.50 | 1 | - |
| Manufacturer | Model | Table size | Features | Number of machines | Year installed |
|---|---|---|---|---|---|
| ENSHU | EV450 | x560 y450 z460 | BT40 | 1 | - |
| Manufacturer | Model | Table size | Features | Number of machines | Year installed |
| LITZ | MV-800 | x800 y450 z540 | BT40 | 1 | - |
| Manufacturer | Model | Table size | Features | Number of machines | Year installed |
| LITZ | CV-1200 | x1200 y600 z675 | BT40 | 1 | - |
| Manufacturer | Model | Table size | Features | Number of machines | Year installed |
| DECKEL MAHO, DMG MORI, GROB, HAAS, HARDINE, HARTFORD, HIWACHEON | MB-56VA MB-66VA etc | - | BT30, 40, 50, Max X=300~1700, Y=250~762, Z=250~720 | 7 | - |
| Manufacturer | Model | Table size | Features | Number of machines | Year installed |
| Enshu Limited | EV450 | x560 y450 z460 | BT40 | 1 | - |
| Manufacturer | Model | Table size | Features | Number of machines | Year installed |
| LITZ | MV-800 | x800 y450 z540 | BT40 | 1 | - |
| Manufacturer | Model | Table size | Features | Number of machines | Year installed |
| LITZ | CV-1200 | x1200 y600 z675 | BT40 | 1 | - |
| Manufacturer | Model | Table size | Features | Number of machines | Year installed |
| DECKEL MAHO, DMG MORI, GROB, HAAS, HARDINE, HARTFORD, HIWACHEON | MB-56VA MB-66VA etc | - | BT30, 40, 50, Max X=300~1700, Y=250~762, Z=250~720 | 8 | - |
| Manufacturer | Model | Table size | Features | Number of machines | Year installed |
|---|---|---|---|---|---|
| MAZAK | VARIAXIS 500-5XII | x510 y510 z460 | - | 1 | - |
| Manufacturer | Model | Table size | Features | Number of machines | Year installed |
| GROB | G352 | x600 y855 z750 | - | 1 | - |
| Manufacturer | Model | Table size | Features | Number of machines | Year installed |
| DMG MORI | DMU50 | x620 y520 z475 | - | 1 | - |
| Manufacturer | Model | Table size | Features | Number of machines | Year installed |
| OKUMA | MU-6300V P | - | No.50 Table Dia 630 | 1 | - |
| Manufacturer | Model | Table size | Features | Number of machines | Year installed |
| MAZAK | VARIAXIS 500-5 II | x510 y510 z460 | - | 1 | - |
| Manufacturer | Model | Table size | Features | Number of machines | Year installed |
| GROB | G352 | x600 y855 z750 | - | 1 | - |
| Manufacturer | Model | Table size | Features | Number of machines | Year installed |
| DMG MORI | DMU50 | x620 y520 z475 | - | 1 | - |
| Manufacturer | Model | Table size | Features | Number of machines | Year installed |
| Okuma Corporation | MU-6300V P | - | No.50 Table Dia 630 | 1 | - |
| Manufacturer | Model | Table size | Features | Number of machines | Year installed |
|---|---|---|---|---|---|
| KANTO | K II | x500 y300 z400 | - | 1 | - |
| Manufacturer | Model | Table size | Features | Number of machines | Year installed |
| KANTO | K II | x500 y300 z400 | - | 1 | - |
| Manufacturer | Model | Table size | Features | Number of machines | Year installed |
|---|---|---|---|---|---|
| TUDA | PROS-400x620 | - | Max Dia400, L=620 | 1 | - |
| Manufacturer | Model | Table size | Features | Number of machines | Year installed |
| TUDA | PROS-400x620 | - | Max Dia400, L=620 | 1 | - |
| Manufacturer | Model | Table size | Features | Number of machines | Year installed |
|---|---|---|---|---|---|
| OKUMA, MAZAK, MIYANO, HARDINGE, COLCHESTER, HWACHEON, SCHAUBLIN | LB3000EXII LB4000EXII | - | Max Dia480, L=1500 | 1 | - |
| Manufacturer | Model | Table size | Features | Number of machines | Year installed |
| OKUMA, MAZAK, MIYANO, HARDINGE, COLCHESTER, HWACHEON, SCHAUBLIN | LB3000EX II LB4000EX II | - | Max Dia480, L=1500 | 7 | - |
| Manufacturer | Model | Table size | Features | Number of machines | Year installed |
|---|---|---|---|---|---|
| CITIZEN, MIYANO, TORNOS, TSUGAMI, etc. | Unknown | - | Dia12～32 | 1 | - |
| Manufacturer | Model | Table size | Features | Number of machines | Year installed |
| CITIZEN, MIYANO, TORNOS, TSUGAMI, etc. | Unknown | - | Dia12～32 | 1 | - |
| Manufacturer | Model | Table size | Features | Number of machines | Year installed |
|---|---|---|---|---|---|
| MAZAK | INTEGREX i 200 | - | Dia658 | 1 | - |
| Manufacturer | Model | Table size | Features | Number of machines | Year installed |
| MAZAK | INTEGREX j 200 | - | Dia530-500 | 1 | - |
| Manufacturer | Model | Table size | Features | Number of machines | Year installed |
| MAZAK | INTEGREX i 200 | - | Dia658 | 1 | - |
| Manufacturer | Model | Table size | Features | Number of machines | Year installed |
| MAZAK | INTEGREX j 200 | - | Dia530-500 | 1 | - |
| Manufacturer | Model | Table size | Features | Number of machines | Year installed |
|---|---|---|---|---|---|
| AGIE CHARMILLES, ARD, CHARMILLES, SODIK etc. | Unknown | x350 y250 z300 | Max 350*250*300, 500Kg | 1 | - |
| Manufacturer | Model | Table size | Features | Number of machines | Year installed |
| AGIE CHARMILLES, ARD, CHARMILLES, SODIK etc. | Unknown | x350 y250 z300 | 500Kg | 4 | - |
| Manufacturer | Model | Table size | Features | Number of machines | Year installed |
|---|---|---|---|---|---|
| MITSUBISHI, SODICK, CASTEK etc. | Unknown | - | Min Dia 0.03, Max 650*420*140 | 1 | - |
| Manufacturer | Model | Table size | Features | Number of machines | Year installed |
| MITSUBISHI, SODICK, CASTEK etc. | Unknown | x650 y420 z140 | Min Dia 0.03 | 1 | - |
| Manufacturer | Model | Table size | Features | Number of machines | Year installed |
|---|---|---|---|---|---|
| CHARMILS, MITSUBISHI, SODICK, TROOP etc. | Unknown | x1050 y800 z350 | Max 1050*800*350, 1500Kg | 1 | - |
| Manufacturer | Model | Table size | Features | Number of machines | Year installed |
| CHARMILS, MITSUBISHI, SODICK, TROOP etc. | Unknown | x1050 y800 z350 | 1500Kg | 4 | - |
| Manufacturer | Model | Table size | Features | Number of machines | Year installed |
|---|---|---|---|---|---|
| TRIPET | MAR200 | - | Max ID 40 | 1 | - |
| Manufacturer | Model | Table size | Features | Number of machines | Year installed |
| TOPKING | OD-H25-SP | - | Internal diameter grinding machine ID0.3～25 | 1 | - |
| Manufacturer | Model | Table size | Features | Number of machines | Year installed |
| OKAMOTO | ACC 350II | - | L=350, W=150 | 1 | - |
| Manufacturer | Model | Table size | Features | Number of machines | Year installed |
| OKAMOTOS | ACC-63-ST | - | L=605, W=300 | 1 | - |
| Manufacturer | Model | Table size | Features | Number of machines | Year installed |
| JUNG, KENT, MITSUBISHI HIGH-TEC, OKAMOTO, SEEDEC, SREEL MASRTER, ZIERCH, etc. | Unknown | - | Max 1000*600 | 1 | - |
| Manufacturer | Model | Table size | Features | Number of machines | Year installed |
| TRIPET | MAR200 | - | Internal diameter grinding machine Max ID 40 | 1 | - |
| Manufacturer | Model | Table size | Features | Number of machines | Year installed |
| TOPKING | OD-H25-SP | - | Internal diameter grinding machine ID0.3～25 | 1 | - |
| Manufacturer | Model | Table size | Features | Number of machines | Year installed |
| Okamoto Machine Tool Works, Ltd. | ACC 350II | - | L=350, W=150 | 1 | - |
| Manufacturer | Model | Table size | Features | Number of machines | Year installed |
| OKAMOTOS | ACC-63-ST | - | L=605, W=300 | 1 | - |
| Manufacturer | Model | Table size | Features | Number of machines | Year installed |
| JUNG, KENT, MITSUBISHI HIGH-TEC, OKAMOTO, SEEDEC, SREEL MASRTER, ZIERCH, etc. | Unknown | - | Max 1000*600 | 1 | - |
| Manufacturer | Model | Table size | Features | Number of machines | Year installed |
|---|---|---|---|---|---|
| MS OPTIMISED TECHNO | SGA2000B | - | 100*50*100, accuracy 0.005, repeatability 0.003 | 1 | - |
| Manufacturer | Model | Table size | Features | Number of machines | Year installed |
| DOEBERI | UPS-150 | - | L=100, H=60, 3axes | 1 | - |
| Manufacturer | Model | Table size | Features | Number of machines | Year installed |
| DOEBERI | PROFILEMAT 710 | - | L+200, H=100, 10axes | 1 | - |
| Manufacturer | Model | Table size | Features | Number of machines | Year installed |
|---|---|---|---|---|---|
| MS OPTIMISED TECHNO | SGA2000B | x100 y50 z100 | accuracy 0.005, repeatability 0.003 | 1 | - |
| Manufacturer | Model | Table size | Features | Number of machines | Year installed |
| DOEBERI | UPS-150 | - | L=100, H=60, 3axes | 1 | - |
| Manufacturer | Model | Table size | Features | Number of machines | Year installed |
| DOEBERI | PROFILEMAT 710 | - | L+200, H=100, 10axes | 1 | - |
| Manufacturer | Model | Table size | Features | Number of machines | Year installed |
|---|---|---|---|---|---|
| ESTARTA, PALMARY, PARAGON etc. | Unknown | - | Dia10～100, L Max1000 | 1 | - |
| Manufacturer | Model | Table size | Features | Number of machines | Year installed |
| ESTARTA, PALMARY, PARAGON etc. | Unknown | - | Dia10～100, L Max1000 | 1 | - |
| Manufacturer | Model | Table size | Features | Number of machines | Year installed |
|---|---|---|---|---|---|
| JONES&SHIPMAN, KELLENBERGER, OKAMOTO, PALMARY, SYUDER, TROPET, TSCHUDIN, etc. | Unknown | - | Max Dia 340, Max Length 750 | 1 | - |
| Manufacturer | Model | Table size | Features | Number of machines | Year installed |
| JONES&SHIPMAN, KELLENBERGER, OKAMOTO, PALMARY, SYUDER, TROPET, TSCHUDIN, etc. | Unknown | - | Max Dia 340, Max Length 750 | 1 | - |
| Manufacturer | Model | Table size | Features | Number of machines | Year installed |
|---|---|---|---|---|---|
| HAUSER | S3 S35 S40 etc | - | X=250~630, Y=250~400, Z=120~500 | 1 | - |
| Manufacturer | Model | Table size | Features | Number of machines | Year installed |
| Hauser GmbH | S3 S35 S40 etc | - | X=250~630, Y=250~400, Z=120~500 | 1 | - |
| Manufacturer | Model | Table size | Features | Number of machines | Year installed |
|---|---|---|---|---|---|
| EWAG, ANCA, ROLLOMATIC, WALTER, SCHNEEBERGER etc. | Unknown | - | Min Dia 0.025~35, L Max 350 | 1 | - |
| Manufacturer | Model | Table size | Features | Number of machines | Year installed |
| EWAG, ANCA, ROLLOMATIC, WALTER, SCHNEEBERGER etc. | Unknown | - | Min Dia 0.025~35, L Max 350 | 1 | - |
| Manufacturer | Model | Table size | Features | Number of machines | Year installed |
|---|---|---|---|---|---|
| YASDA | YBM950 VerIII | x900 y500 z350 | BT40 | 1 | - |
| Manufacturer | Model | Table size | Features | Number of machines | Year installed |
| Yasda Precision Tools KK. | YBM950 VerIII | x900 y500 z350 | BT40 | 1 | - |
| Manufacturer | Model | Table size | Features | Number of machines | Year installed |
|---|---|---|---|---|---|
| HONG JI | CNC ST-1500 | x1450 y500 | - | 1 | - |
| Manufacturer | Model | Table size | Features | Number of machines | Year installed |
| HONG JI | CNC ST-1500 | x1450 y500 | - | 1 | - |
| Manufacturer | Model | Table size | Features | Number of machines | Year installed |
|---|---|---|---|---|---|
| AMADA MACHINERY CO., LTD. | EM2510NT | x1270 y5000 | 1270*5000, Max 200kN | 1 | - |
| Manufacturer | Model | Table size | Features | Number of machines | Year installed |
| Amada Co., Ltd. | EM2510NT | - | 1270*5000, Max 200kN | 1 | - |
| Manufacturer | Model | Table size | Features | Number of machines | Year installed |
|---|---|---|---|---|---|
| AMADA MACHINERY CO., LTD. | HG1003 RG100 etc | - | HG1003, RG100 etc. | 1 | - |
| Manufacturer | Model | Table size | Features | Number of machines | Year installed |
| Amada Co., Ltd. | HG1003 RG100 etc | - | Max 3100mm | 1 | - |
| Manufacturer | Model | Table size | Features | Number of machines | Year installed |
|---|---|---|---|---|---|
| Unknown | Unknown | - | - | 1 | - |
| Manufacturer | Model | Table size | Features | Number of machines | Year installed |
| Unknown | Unknown | - | - | 1 | - |
| Manufacturer | Model | Table size | Features | Number of machines | Year installed |
|---|---|---|---|---|---|
| Unknown | Unknown | - | 30-250 tons | 1 | - |
| Manufacturer | Model | Table size | Features | Number of machines | Year installed |
| Unknown | Unknown | - | 30-250 tons | 1 | - |
| Manufacturer | Model | Table size | Features | Number of machines | Year installed |
|---|---|---|---|---|---|
| Unknown | Unknown | - | 50-350 tons | 1 | - |
| Manufacturer | Model | Table size | Features | Number of machines | Year installed |
| Unknown | Unknown | - | 50-350 tons | 1 | - |
| Manufacturer | Model | Table size | Features | Number of machines | Year installed |
|---|---|---|---|---|---|
| Unknown | Unknown | - | Painting, black dyeing, electroless nickel, hard chrome, alumite, various coatings, Parkerizing | 1 | - |
| Manufacturer | Model | Table size | Features | Number of machines | Year installed |
| Unknown | Unknown | - | Painting, black dyeing, electroless nickel, hard chrome, alumite, various coatings, Parkerizing | 1 | - |
| Manufacturer | Model | Table size | Features | Number of machines | Year installed |
|---|---|---|---|---|---|
| MITUTOYO | M574 | x500 y700 z400 | - | 1 | - |
| Manufacturer | Model | Table size | Features | Number of machines | Year installed |
| ACCRETECH, MITUTOYO etc. | Unknown | x1000 y1200 z600 | - | 1 | - |
| Manufacturer | Model | Table size | Features | Number of machines | Year installed |
| MITUTOYO | M574 | x500 y700 z400 | - | 1 | - |
| Manufacturer | Model | Table size | Features | Number of machines | Year installed |
| ACCRETECH, MITUTOYO etc | Unknown | x1000 y1200 z600 | - | 1 | - |
| Manufacturer | Model | Table size | Features | Number of machines | Year installed |
|---|---|---|---|---|---|
| AMADA MACHINERY CO., LTD. | GPS630 | - | Max force 197kN | 1 | - |
| Manufacturer | Model | Table size | Features | Number of machines | Year installed |
| Amada Co., Ltd. | GPS630 | - | Max force 197kN | 1 | - |
| Manufacturer | Model | Table size | Features | Number of machines | Year installed |
|---|---|---|---|---|---|
| TECHNI | TECHJEC 3000-X2 | x1500 y3000 | - | 1 | - |
| Manufacturer | Model | Table size | Features | Number of machines | Year installed |
| TECHNI | TECHJEC 3000-X2 | x1500 y3000 | - | 1 | - |
| Manufacturer | Model | Table size | Features | Number of machines | Year installed |
|---|---|---|---|---|---|
| Unknown | Unknown | - | - | 1 | - |
| Manufacturer | Model | Table size | Features | Number of machines | Year installed |
| Unknown | Unknown | - | - | 1 | - |
| Manufacturer | Model | Table size | Features | Number of machines | Year installed |
|---|---|---|---|---|---|
| Unknown | Unknown | - | Vacuum hardening, induction hardening, nitriding treatment, tuftride treatment, sub-zero treatment | 1 | - |
| Manufacturer | Model | Table size | Features | Number of machines | Year installed |
| Unknown | Unknown | - | Vacuum hardening, induction hardening, nitriding treatment, tuftride treatment, sub-zero treatment | 1 | - |
CAD/CAM
| Acceptable CAD format | STEP(STP),DWG,Parasolid(x_t,x_b),DXF |
|---|---|
| CAD/CAM software used |
Solid Edge
（Siemens PLM Software Inc.）
NX （Siemens PLM Software Inc.） |
CONTACT