Technology / product information

Performance Deterioration Caused by Contamination and Moisture, and Fundamental Countermeasures
Visible “Cloudiness” — A Warning Sign of Abnormality
“The oil turns white and cloudy soon after adding new oil.”


“The oil quickly loses its transparency.”


“Valves are malfunctioning, but the cause is unknown.”


Such phenomena are important signs indicating the beginning of oil quality degradation.
Cloudiness is the visible form of contamination.
Leaving this unaddressed leads to risks of performance decline, failure, and equipment stoppage.
Contamination Source | Cause | Main Effect
Moisture | Condensation, humidity, or coolant leakage | Cloudiness, emulsification, corrosion, oil film breakdown
Emulsion | Mixing of oil and water | Viscosity change, foaming, machine malfunction
Foreign particles | Wear debris, dust, or scale | Filter clogging, valve sticking
Oxidation products | Sludge from thermal degradation | Darkening, viscosity increase, operation failure
➡ Even slight contamination can significantly affect performance.
On-Site Problems Caused by Decreased Oil Cleanliness

Symptom | Cause | Result
Valve sticking | Sludge accumulation | Operational abnormality, control failure
Pump seizure | Oil film rupture | Expensive parts replacement
Sensor misdetection | Moisture or fine particles | Possible production line stoppage
Frequent oil changes | Inability to maintain cleanliness | Increased cost, waste oil, and workload
Countermeasure: From “Replace When Dirty” → “Keep It Clean”
Traditionally, oil was simply replaced when it became dirty.
However, in recent years, the concept of protecting, regenerating, and continuously using the oil itself is gaining attention.
Fundamental Solution: Maintaining Oil Cleanliness with “Miracle Boy”
What is Miracle Boy?
A multi-functional adsorptive oil purification unit that simultaneously removes the three main contaminants — moisture, particles, and oxidation products.
Three Purification Mechanisms
Contaminant | Removal Technology | Effect

Moisture & Emulsion | Physical adsorption by special material (down to ppm level) | Prevents cloudiness, foaming, and corrosion
Fine Particles / Foreign Matter | Deep filtration structure (effective below 3 µm) | Protects valves and pumps
Oxidized sludge | Decomposes and adsorbs sludge via multi-layer structure | Suppresses darkening, viscosity increase

→ Restores transparency and maintains new-oil-level cleanliness over the long term
Dưới đây là phiên bản chuyển đổi dữ liệu từ bảng về "Example: Changes after introduction (Press Processing Factory)" thành định dạng văn bản có phân tách bằng dấu **dọc (pipe)** (`|`):

**Cấu trúc bảng:**

| Indicator | Before Introduction | After |
| :--- | :--- | :--- |
| Moisture content (ppm) | 1,200 | 75 |
| Contamination (mg/100ml) | 5.7 | 0.1 |
| Valve malfunctions | 2–3 times/month | 0 times / 6 months |

**Phiên bản chuyển đổi (dùng dấu `|`):**

```
Example: Changes after introduction (Press Processing Factory)
Indicator | Before Introduction | After

Moisture content (ppm) | 1,200 | 75
Contamination (mg/100ml) | 5.7 | 0.1
Valve malfunctions | 2–3 times/month | 0 times / 6 months

→ Cloudiness and whitening were eliminated, achieving stable operation without oil replacement.
Summary: Put an End to “Cloudy Oil is Normal”
Oil cloudiness is a sign that "contamination is not being prevented."


Maintaining performance without relying on replacement is the new standard.


With Miracle Boy, you can protect both oil cleanliness and your equipment.